Simple GPS tracker for M5Stack with informative display and several display options using the Tiny GPS ++ library.
The M5Stick-V is an AIOT (AI + IOT) camera with machine vision capabilities.
A library to display texts on the M5StickC in any orientation. The display scrolls and wraps text lines automatically.
This is a simple project using M5Stick and MicroPython in order to obtain data from the Hall sensors and temperature embedded in the chip.
A wearable, sensor-packed ESP32 IoT device with TFT display.
Simple setup of a Seeed Studio Grove ultrasonic sensor (not HC-SR04) in Arduino.
LoRaWAN module is supported by UIFlow!
This uses the stepper driven 6060 push and rs485. The movement is based on the tilt of the M5stick which is measured with the built-in IMU.
Use ESP32 with Tuya IoT platform and MQTT
I tried indoor positioning by BLE with iBeacon and M5MtickC
Make a simple watch device using UIFlow.
The Simple Hello World starter program for the M5Stack Coreink and M5Paper devices, programmed in UIFLow.
In this project we will learn how to make a WiFi Scanner using a M5StickC ESP32 module to Display the WiFi networks around.
A low cost, simple to customise and program lone worker monitor or fall alarm.
Pilot Phillips Hue with M5Stick.
Air quality monitoring using the M5Stack Air Quality Kit and the Waylay IO IoT platform.
Tilt left and right to move the ball
LidarBot is supported by UIFlow. Welcome to test!
There are far too few projects with the m5paper, a device that I am loving to play with. That is why I am posting this first day project.
My posture gradually gets worse when I work on a PC. I developed ”Bad Pose Detector" using by M5StickV, it notices sound and LED.
How to connect a passive buzzer to an M5StickC.
Pilot a Push6060 with ATOM and Tail485 with IUFLOW
How to program M5Stack products using UIFlow and have Thonny running to diagnose errors over USB.
Turns your M5StickC with the ToF HAT into a laser rangefinder.