Turns your M5StickC with the ToF HAT into a laser rangefinder.
A library to display texts on the M5StickC in any orientation. The display scrolls and wraps text lines automatically.
Simple GPS tracker for M5Stack with informative display and several display options using the Tiny GPS ++ library.
A wearable, sensor-packed ESP32 IoT device with TFT display.
LoRaWAN module is supported by UIFlow!
The M5Stick-V is an AIOT (AI + IOT) camera with machine vision capabilities.
This is a simple project using M5Stick and MicroPython in order to obtain data from the Hall sensors and temperature embedded in the chip.
Simple setup of a Seeed Studio Grove ultrasonic sensor (not HC-SR04) in Arduino.
This uses the stepper driven 6060 push and rs485. The movement is based on the tilt of the M5stick which is measured with the built-in IMU.
Pilot Phillips Hue with M5Stick.
A low cost, simple to customise and program lone worker monitor or fall alarm.
Make a simple watch device using UIFlow.
Tilt left and right to move the ball
How to connect a passive buzzer to an M5StickC.
LidarBot is supported by UIFlow. Welcome to test!
My posture gradually gets worse when I work on a PC. I developed ”Bad Pose Detector" using by M5StickV, it notices sound and LED.
In this project we will learn how to make a WiFi Scanner using a M5StickC ESP32 module to Display the WiFi networks around.
I tried indoor positioning by BLE with iBeacon and M5MtickC
Pilot a Push6060 with ATOM and Tail485 with IUFLOW
In this tutorial we will learn how to program ESP32 M5Stack StickC with Arduino IDE and Visuino to Display any text on LCD.
In this project we will learn how to make a mini Alarm Warning using a mini PIR sensor and a M5StickC ESP32 board. Watch the video!
In this project we will learn how to display a random color on the NeoPixels LED Ring using a M5StickC ESP32 board. Watch the Video.
The Simple Hello World starter program for the M5Stack Coreink and M5Paper devices, programmed in UIFLow.
In this tutorial we will learn how to program ESP32 M5Stack StickC with Arduino IDE and Visuino to Display the time on the LCD.