A customisable ESP32-based touchscreen project to control MQTT switches or HomeKit accessories (through the Home App).
Take a $9 M5StickC, few lines of YAML configuration to build ESPHome, Home Assistant and start controlling your TVs and climates in minutes.
Hello, I created an alarm panel controlled by RFID, based on a M5Stack with RFID face. Communication is done via secure MQTT over WiFi.
A simple ESP-Now doorbell using an M5Stack Atom Matrix and Core2 controller.
This project replaced my daughter's old, broken night lamp. Its main components are: Atom Lite ESP32, neopixel strip, IR unit.
Control IKEA Bekant Desk sit/stand height with M5Stack M5Paper using two Relay units and a ToF (time-of-flight sensor VL53L0x) unit.
Control IKEA Bekant Desk sit/stand height with M5Stack Core2 using two Relay units and a ToF (time-of-flight sensor VL53L0x) unit.
A watch that works with a small M5StickC Equipped with a minimum operating clock and automatic sleep mode, contributing to energy saving
After I recently discovered how to play WAV files on the M5Stack, I thought it would be perfect to make a flashcard system.
Used StickC with ESPHap library to connect to HomeKit
We developed a stereo web radio for the M5Stack with software, audio board, 3d printed enclosure and documentation.
The idea is simple, I would like to create Home Automation unit with something intelligent. So I combine M5StickV and M5StickC.
Make a doorbell for the front door with M5StickC and notify Slack when the button is pressed.