Using a Tensorflow Lite Micro model this edge device keeps an ear out and vibrates if you are snoring.
Detect running faucet using low powered i. MXRT1010 development board and Edge Impulse Studio.
A practical use of the M5Stack Atom RS232 as part of a remote display.
Learn how to send messages to The Things Network with MicroPython. You will need a The Things Network Gateway near you.
Use your M5Stack ESP32 Basic to receive little Logo programs via MQTT and show the results.
Use your ATOM Matrix to receive text via MQTT and scroll it on the RGB LEDs.
Here is a small thing that can help to use more electricity when it is produced by renewable sources.
Simple MicroPython code for the ATOM 5 x 5 LED matrix and its built-in MPU6886 accelerometer. It works with the M5StickC + NeoFlash Hat.
Non-intrusive energy consumption analysis for effective climate change mitigation using machine learning at the edge.
S.M.A.R.S Quad using M5Stack electronic components.
Control IKEA Bekant Desk sit/stand height with M5Stack M5Paper using two Relay units and a ToF (time-of-flight sensor VL53L0x) unit.
Control IKEA Bekant Desk sit/stand height with M5Stack Core2 using two Relay units and a ToF (time-of-flight sensor VL53L0x) unit.
A simple ESP-Now doorbell using an M5Stack Atom Matrix and Core2 controller.
Hand Hygienics aims to reduce spread of Covid-19 through contact.
A technology which increases efficiency in signing in or out during peak hour areas when entering the campus while the SafeEntry implies.
M5Stack recently released an updated LoRaWAN module. This tutorial teaches you how to connect it to The Things Network using UIFlow.
How to control Dji Tello drone by M5stack and Uiflow blocks at your wrist!. A base for STEM projects
I made a mini 3D POV Display to enhance the Christmas spirit.
FIRST OTP BASED ON M5StickC for 2FA
Gamepad (prototype) based on M5StickC (ESP32 Pico) with I2C joystick module, dual button unit, and Bluetooth Low Energy connectivity.
In this video we will learn how to send values from StickC board to Delphi VCL Application using Visuino.
In this tutorial we will learn how to program ESP32 M5Stack StickC with Arduino IDE and Visuino to Display a time on the LCD and also set th
In this tutorial we will learn how to program ESP32 M5Stack StickC to Display a time on the LCD and also set the time using StickC buttons.
There are bound to be times when you need to add music or SFX to your M5Stack projects. Here's how to do so with MicroPython.