This is a simple project using M5Stick and MicroPython in order to obtain data from the Hall sensors and temperature embedded in the chip.
A library to display texts on the M5StickC in any orientation. The display scrolls and wraps text lines automatically.
A wearable, sensor-packed ESP32 IoT device with TFT display.
m5WebRadio is a sketch to play web streaming radio station on a M5Stick-C esp32 module: A $13 esp32 net radio player.
M5StickV and M5StickC with HID Bluetooth Wireless or Atomic QR-Code reader
I wanted to make a watch but also a wearable tool.
This is the war for getting the time...
A inner maker competition of M5Stack.
M5StickC + Angle unit = Protractor (detecting range: 0-180 degrees）
Analog clock for M5StickC whose background can be changed with PNG file data.
Using M5StickC on RoverC and JoyC with M5Atom attached to display direction of the RoverC.
This uses the stepper driven 6060 push and rs485. The movement is based on the tilt of the M5stick which is measured with the built-in IMU.
Pilot Phillips Hue with M5Stick.
A hand-washing timer with water sound detection, which uses the M5StickC's built-in microphone and does not require any external components.
Make a simple watch device using UIFlow.
A low cost, simple to customise and program lone worker monitor or fall alarm.
A "simple" binary clock for the M5StickC. Using NTP to set the time, and the RTC to display the time. No need to set a timezone either.
How to connect a passive buzzer to an M5StickC.
I made a watch using M5StickC.
Loose meetings are a bad business culture in Japan. The device “NeckTimer” that can appeal to the surroundings casually solves on time!
Quickly adding a spooky eye to your project with an esp32 TFT module and an acrylic half sphere lens.
I made a CO2 concentration meter for the purpose of room ventilation guide. The CO2 sensor is MH-Z19B, NDIR type.
A tool that helps makers and professionals level their FDM-based 3D Print Bed