Simple GPS tracker for M5Stack with informative display and several display options using the Tiny GPS ++ library.
To build a Nixie tube clock is a perpetual project on my mind. I wanted to see was made by software.
The M5Stick-V is an AIOT (AI + IOT) camera with machine vision capabilities.
This is a simple project using M5Stick and MicroPython in order to obtain data from the Hall sensors and temperature embedded in the chip.
A library to display texts on the M5StickC in any orientation. The display scrolls and wraps text lines automatically.
Using the M5Stack to visualize timeseries data of the Covid-19 pandemic.
A wearable, sensor-packed ESP32 IoT device with TFT display.
LoRaWAN module is supported by UIFlow!
Detect cars and people which is blinding by drivers. You need only putting M5Stack and you aren't doing dedicated construction.
This is the war for getting the time...
I wanted to make a watch but also a wearable tool.
A inner maker competition of M5Stack.
M5StickC + Angle unit = Protractor (detecting range: 0-180 degrees）
An IoT office assistant with "free, busy and lunch" indicators, Pomodoro timers and quick meetings with IFTTT and your calendar integration.
Change relationship between plants and human and make much deeper relationship.
Brownie is an AI camera app that allows you to automate your daily life with simple operation.
Simple setup of a Seeed Studio Grove ultrasonic sensor (not HC-SR04) in Arduino.
Analog clock for M5StickC whose background can be changed with PNG file data.
Make a simple watch device using UIFlow.
Make your plants smart and monitor water, temperature and humidity!
Using M5StickC on RoverC and JoyC with M5Atom attached to display direction of the RoverC.
This uses the stepper driven 6060 push and rs485. The movement is based on the tilt of the M5stick which is measured with the built-in IMU.
Pilot Phillips Hue with M5Stick.
I made a watch using M5StickC.