The M5Stick-V is an AIOT (AI + IOT) camera with machine vision capabilities.
My posture gradually gets worse when I work on a PC. I developed ”Bad Pose Detector" using by M5StickV, it notices sound and LED.
Make your plants smart and monitor water, temperature and humidity!
This uses the stepper driven 6060 push and rs485. The movement is based on the tilt of the M5stick which is measured with the built-in IMU.
Brownie is an AI camera app that allows you to automate your daily life with simple operation.
Detect cars and people which is blinding by drivers. You need only putting M5Stack and you aren't doing dedicated construction.
Simple GPS tracker for M5Stack with informative display and several display options using the Tiny GPS ++ library.
To build a Nixie tube clock is a perpetual project on my mind. I wanted to see was made by software.
This is a simple project using M5Stick and MicroPython in order to obtain data from the Hall sensors and temperature embedded in the chip.
LoRaWAN module is supported by UIFlow!
A inner maker competition of M5Stack.
M5StickC + Angle unit = Protractor (detecting range: 0-180 degrees）
Make a simple watch device using UIFlow.
This is the war for getting the time...
How to connect a passive buzzer to an M5StickC.
I made a watch using M5StickC.
I wanted to make a watch but also a wearable tool.
LidarBot is supported by UIFlow. Welcome to test!
Pilot Phillips Hue with M5Stick.
Tilt left and right to move the ball
A "simple" binary clock for the M5StickC. Using NTP to set the time, and the RTC to display the time. No need to set a timezone either.
Simple setup of a Seeed Studio Grove ultrasonic sensor (not HC-SR04) in Arduino.
A low cost, simple to customise and program lone worker monitor or fall alarm.
Analog clock for M5StickC whose background can be changed with PNG file data.