A library to display texts on the M5StickC in any orientation. The display scrolls and wraps text lines automatically.
Simple GPS tracker for M5Stack with informative display and several display options using the Tiny GPS ++ library.
A wearable, sensor-packed ESP32 IoT device with TFT display.
The M5Stick-V is an AIOT (AI + IOT) camera with machine vision capabilities.
This is a simple project using M5Stick and MicroPython in order to obtain data from the Hall sensors and temperature embedded in the chip.
LoRaWAN module is supported by UIFlow!
Simple setup of a Seeed Studio Grove ultrasonic sensor (not HC-SR04) in Arduino.
This uses the stepper driven 6060 push and rs485. The movement is based on the tilt of the M5stick which is measured with the built-in IMU.
Make a simple watch device using UIFlow.
Pilot Phillips Hue with M5Stick.
Tilt left and right to move the ball
A low cost, simple to customise and program lone worker monitor or fall alarm.
How to connect a passive buzzer to an M5StickC.
LidarBot is supported by UIFlow. Welcome to test!
My posture gradually gets worse when I work on a PC. I developed ”Bad Pose Detector" using by M5StickV, it notices sound and LED.
Pilot a Push6060 with ATOM and Tail485 with IUFLOW
I tried indoor positioning by BLE with iBeacon and M5MtickC
In this project we will learn how to use a FAN L9110 module using a M5StickC ESP32 board.
In this project we will learn how to connect and make an LED Blink using a M5StickC ESP32 module.
In this tutorial we will learn how to program ESP32 M5Stack StickC with Arduino IDE and Visuino. Watch a demonstration video.