The M5Stick-V is an AIOT (AI + IOT) camera with machine vision capabilities.
My posture gradually gets worse when I work on a PC. I developed ”Bad Pose Detector" using by M5StickV, it notices sound and LED.
This uses the stepper driven 6060 push and rs485. The movement is based on the tilt of the M5stick which is measured with the built-in IMU.
Simple GPS tracker for M5Stack with informative display and several display options using the Tiny GPS ++ library.
This is a simple project using M5Stick and MicroPython in order to obtain data from the Hall sensors and temperature embedded in the chip.
LoRaWAN module is supported by UIFlow!
Utilize a 6-axis IMU sensor SH200Q, to capture a magic wand motion.
M5Stack user Yama-chan combined a Raspberry Pi Zero with the Faces Keyboard kit to make an awesome linux pocket computer.
Make a simple watch device using UIFlow.
A robot that standing with steel linear of motors.
How to connect a passive buzzer to an M5StickC.
An FM radio (RDA5807) powered by UIFlow. 📻
LidarBot is supported by UIFlow. Welcome to test!
Pilot Phillips Hue with M5Stick.
Tilt left and right to move the ball
M5Stack and Micro:bit can control each other, thanks to the M5:Bit
Simple setup of a Seeed Studio Grove ultrasonic sensor (not HC-SR04) in Arduino.
This allows the display to be rotated to 0, 90, 180, and 270 degrees at any time with no added overhead.
A low cost, simple to customise and program lone worker monitor or fall alarm.
Technology to protect puddle pudding!